Switchboard Upgrades across south-east Queensland.

Switchboard upgrades completed safely and to code, with upfront pricing before any work begins.

Fully licensed & compliant
Commercial & industrial focus
Rapid breakdown response
50+ years combined experience

What switchboard upgrades covers

A switchboard upgrade replaces or rewires an ageing or unsafe switchboard so it can safely handle your site's current electrical load.

JCS Electrical is a licensed commercial electrician based on the Gold Coast, with 10+ years working across south-east Queensland, commercial and industrial sites only.

Licensed in Queensland and New South Wales, and Cm3 certified for controlled commercial sites.

How we deliver it

We assess the existing switchboard and your site's load before quoting, so the price we give is the price you pay.

Upgrades are scheduled to limit downtime, with power restored and the site signed off before we leave.

Switchboard Upgrades

What is included

The exact scope of a switchboard upgrade depends on your site's existing setup, get in touch and we'll confirm what's covered.

Switchboard Inspections

Detailed assessment of the existing switchboard, its condition, installation, circuit protection and suitability for the site.

Load and Capacity Assessment

Review of the site's existing and future electrical demand to determine whether the switchboard has sufficient capacity.

Switchboard Replacements

Removal and replacement of ageing, damaged or non-compliant commercial switchboards and distribution boards.

Switchboard Extensions

Modification or extension of existing switchboards to accommodate additional circuits, equipment or tenancy requirements.

Circuit Protection Upgrades

Installation or replacement of circuit breakers, RCDs, RCBOs, main switches and other protective devices.

Metering and Main Supply Upgrades

Upgrades involving commercial metering, CT arrangements, consumer mains and main incoming supply equipment where required.

Shutdown and Changeover Planning

Carefully planned shutdowns, temporary supply arrangements and staged changeovers to minimise disruption to the site.

Testing, Labelling and Handover

Final testing, circuit identification, updated labelling and the required electrical documentation following completion.

The standards this work is measured against

Compliance isn't optional on a commercial or industrial site, our work is measured against the same standards inspectors and insurers check against.

AS/NZS 3760

In-service safety inspection and testing of electrical equipment

AS/NZS 3012

Electrical installations, construction and demolition sites

AS 2293

Emergency escape lighting and exit signs

AS/NZS 3000

Electrical installations, the wiring rules

Why it matters on a commercial site

An overloaded or outdated switchboard is one of the most common causes of nuisance trips, equipment damage and, in the worst case, fire risk on a commercial site.

Upgrading it properly protects the equipment connected to it and keeps your site compliant as your power needs grow.

Older boards were sized for the equipment of their day. Adding air conditioning, extra plant, solar or EV charging to a board that was never designed for it is where capacity problems usually start, and the board is the cheapest point in the system to deal with them.

An upgrade is also the point where circuit protection is brought up to current requirements, and where the board finally gets labelled and documented properly, which makes every future job on the site faster and safer.

Where we do switchboard upgrades

The same licensed team covers every area we work in across south-east Queensland, so the standard does not change with the postcode. Choose an area to see how we work there.

Consistent standards across every job.

Commercial &
Industrial Experts

From shopping centres to industrial sites, we understand the pressures of a live commercial environment.

Licensed &
compliant

Fully licensed in Queensland and New South Wales, and Cm3 certified for controlled commercial sites.

Service to
major projects

From routine maintenance to large scale fitouts and new builds, we scale to the size of the job.

One point
of contact

One team stays across your site, so you are not explaining the job again to someone new.

Trusted on site, trusted in the office

1 / 5

Trusted across south-east Queensland

Trusted by property managers, retailers, builders and body corporates across the region.

Retail First
CBRE
Australia Fair
Savills
Logan Hyperdome
First Asset Management
homeWORLD Helensvale
Ray White Commercial
Fairfield Gardens
Mt Gravatt Plaza
Faith Lutheran College Redlands
Future Civil Group
IGA
NNB Group

Common questions

Common signs include nuisance trips, visible damage, or a board that can't handle your site's current load.

It depends on the scope and your site's existing setup, we'll confirm a timeframe as part of the quote.

Yes, briefly, we schedule the shutdown to limit downtime and restore power before we leave site.

Yes. We assess your switchboard and load first, so the price we quote is the price you pay.

In many cases yes, we'll confirm exactly what's possible once we've assessed your existing setup.

Compliance guides & insights

What is test and tagging?
Testing
19 Nov 2026

What is test and tagging?

Test and tagging is the routine inspection and electrical testing of plug-in equipment, followed by a tag on the lead that records the result.

Switchboard Compliance & Upgrade Guide
Compliance
12 Jul 2026

Switchboard Compliance & Upgrade Guide

Boards are rarely replaced because they fail. They are replaced because the building changed around them and the board never caught up.

Ready when you are.

Tell us what's going on and we'll get back to you with the right next step, whether that's a quote, a site visit or a discussion about your requirements.

1300 JCS NOW1300 527 669