Data & Communications Cabling across south-east Queensland.

Data cabling installation for commercial fitouts, offices and new builds across the Gold Coast and Brisbane.

Fully licensed & compliant
Commercial & industrial focus
Rapid breakdown response
50+ years combined experience

What data & communications cabling covers

Data and communications cabling is the network backbone behind every phone, computer and system on your site.

We install and terminate structured data and communications cabling for commercial fitouts, office refurbishments and new builds, so your network is reliable from the day you move in rather than an afterthought bolted on later.

It's handled by the same licensed team already doing your other electrical work.

How we deliver it

We plan cable runs and containment alongside your power and lighting work, so data infrastructure is considered from the start of a fitout or build, rather than retrofitted around finished walls and ceilings.

Every run is tested and labelled on completion, so your IT provider can plug in with a network that's documented properly.

Data & Communications Cabling

What is included

The exact scope depends on your site and cable run count. Get in touch for a tailored quote.

Structured Data Cabling

Installation of structured communications cabling for commercial offices, retail tenancies, schools and industrial facilities.

Data Outlets

Installation, relocation and replacement of data outlets for computers, phones, printers and other network-connected equipment.

Communications Racks

Supply and installation of communications racks, cabinets and associated equipment to keep network infrastructure organised and accessible.

Patch Panels and Cable Management

Installation and termination of patch panels, cable trays and cable-management systems within communications rooms and cabinets.

Wireless Access Point Cabling

Cabling and data outlets for wireless access points positioned throughout commercial and industrial sites.

Equipment and Device Cabling

Data cabling for televisions, digital displays, cameras, access-control equipment and other connected devices.

Testing and Fault Finding

Testing of new and existing cabling to identify damaged cables, connection faults and performance issues.

Labelling and Documentation

Clear labelling of outlets, cables and patch panels, with test results and documentation provided at completion.

The standards this work is measured against

Compliance isn't optional on a commercial or industrial site. Our work is measured against the same standards inspectors and insurers check against.

AS/NZS 3760

In-service safety inspection and testing of electrical equipment

AS/NZS 3012

Electrical installations, construction and demolition sites

AS 2293

Emergency escape lighting and exit signs

AS/NZS 3000

Electrical installations, the wiring rules

Why it matters on a commercial site

Poorly planned or badly terminated cabling causes network problems that are hard to trace later, especially once walls and ceilings are closed up.

Getting it right during the fitout or build, done by the same team as the rest of the electrical work, avoids a second contractor coming back to chase down a fault in someone else's cabling.

Cabling is the part of a fitout that is hardest to change later. A run that was tight on the day becomes impossible once the ceiling is closed, and the cost of adding capacity afterwards is rarely proportionate to the cost of allowing for it up front.

It also outlives the equipment plugged into it. Switches and handsets are replaced several times over the life of a building, so the quality of the cable in the walls sets what the network can do years after the fitout is finished.

Where we do data & communications cabling

The same licensed team covers every area we work in across south-east Queensland, so the standard does not change with the postcode. Choose an area to see how we work there.

Consistent standards across every job.

Commercial &
Industrial Experts

From shopping centres to industrial sites, we understand the pressures of a live commercial environment.

Licensed &
compliant

Fully licensed in Queensland and New South Wales, and Cm3 certified for controlled commercial sites.

Service to
major projects

From routine maintenance to large scale fitouts and new builds, we scale to the size of the job.

One point
of contact

One team stays across your site, so you are not explaining the job again to someone new.

Trusted on site, trusted in the office

1 / 5

Trusted across south-east Queensland

Trusted by property managers, retailers, builders and body corporates across the region.

Retail First
CBRE
Australia Fair
Savills
Logan Hyperdome
First Asset Management
homeWORLD Helensvale
Ray White Commercial
Fairfield Gardens
Mt Gravatt Plaza
Faith Lutheran College Redlands
Future Civil Group
IGA
NNB Group

Common questions

Yes. We plan cable runs alongside power and lighting, so it's considered from the start rather than added later.

Yes. Every run is tested and labelled on completion, so it's documented properly for your IT provider.

Commercial fitouts, office refurbishments and new builds across south-east Queensland.

In most cases yes, though it's more straightforward when planned in from the start of a fitout or build.

We work directly with your IT provider and other trades so the network is ready from day one.

Compliance guides & insights

What is test and tagging?
Testing
19 Nov 2026

What is test and tagging?

Test and tagging is the routine inspection and electrical testing of plug-in equipment, followed by a tag on the lead that records the result.

Switchboard Compliance & Upgrade Guide
Compliance
12 Jul 2026

Switchboard Compliance & Upgrade Guide

Boards are rarely replaced because they fail. They are replaced because the building changed around them and the board never caught up.

Ready when you are.

Tell us what's going on and we'll get back to you with the right next step, whether that's a quote, a site visit or a discussion about your requirements.

1300 JCS NOW1300 527 669