Fault Finding & Breakdowns across south-east Queensland.

Electrical fault finding for commercial sites across Brisbane and the wider south-east, when something's already gone wrong.

Fully licensed & compliant
Commercial & industrial focus
Rapid breakdown response
50+ years combined experience

What fault finding & breakdowns covers

When a circuit trips, a system drops out or equipment stops working, fault finding is how we track down what's actually causing it.

We diagnose electrical faults and breakdowns across commercial and industrial sites, working through the circuit methodically to identify the real cause, then repair it properly.

Our team responds to breakdowns as a priority, because a site that isn't running is costing you money.

How we deliver it

We start with the symptoms you're seeing and work back through the circuit, isolating sections until the fault is confirmed rather than guessed at.

Once we know what's actually wrong, we explain it in plain terms before we fix it, so you know what happened and what it took to sort out.

Fault Finding & Breakdowns

What is included

The exact scope depends on what's happening on site. Get in touch and we'll assess it.

Electrical Breakdown Response

Responsive assistance for commercial and industrial electrical faults that are interrupting normal site operations.

Electrical Fault Diagnosis

Systematic testing to identify the source of electrical problems rather than repeatedly replacing parts without confirming the cause.

Power and Circuit Faults

Investigation of lost power, failed circuits, damaged outlets, faulty isolators and other electrical supply issues.

Lighting and Control Faults

Diagnosis and repair of failed lighting circuits, sensors, timers, contactors and lighting control equipment.

Nuisance Tripping

Testing of circuits, equipment and protective devices to determine why breakers or RCDs are repeatedly tripping.

Switchboard Faults

Investigation of damaged components, overheating, circuit protection issues and other faults originating within switchboards.

Emergency Make-Safe Work

Isolation or temporary make-safe work where an immediate permanent repair cannot be completed safely.

Permanent Repairs and Reporting

Completion of approved repairs, final testing and clear reporting on the fault, its cause and the work performed.

The standards this work is measured against

Compliance isn't optional on a commercial or industrial site. Our work is measured against the same standards inspectors and insurers check against.

AS/NZS 3760

In-service safety inspection and testing of electrical equipment

AS/NZS 3012

Electrical installations, construction and demolition sites

AS 2293

Emergency escape lighting and exit signs

AS/NZS 3000

Electrical installations, the wiring rules

Why it matters on a commercial site

A breakdown on a live commercial site doesn't wait for a convenient time, and the longer a fault goes undiagnosed, the more it can cost in downtime or damage to other equipment.

Getting the real cause fixed the first time, rather than a temporary workaround, is what keeps the same fault from coming back next month.

Intermittent faults are the expensive ones. Something that trips once a week and resets itself is easy to live with and hard to catch, and it tends to get worse on its own schedule rather than yours.

Part of what you are paying for is the answer, not just the repair. Knowing which circuit, which piece of equipment and what caused it is what lets you decide whether to repair it, replace it or budget for it properly.

Where we do fault finding & breakdowns

The same licensed team covers every area we work in across south-east Queensland, so the standard does not change with the postcode. Choose an area to see how we work there.

Consistent standards across every job.

Commercial &
Industrial Experts

From shopping centres to industrial sites, we understand the pressures of a live commercial environment.

Licensed &
compliant

Fully licensed in Queensland and New South Wales, and Cm3 certified for controlled commercial sites.

Service to
major projects

From routine maintenance to large scale fitouts and new builds, we scale to the size of the job.

One point
of contact

One team stays across your site, so you are not explaining the job again to someone new.

Trusted on site, trusted in the office

1 / 5

Trusted across south-east Queensland

Trusted by property managers, retailers, builders and body corporates across the region.

Retail First
CBRE
Australia Fair
Savills
Logan Hyperdome
First Asset Management
homeWORLD Helensvale
Ray White Commercial
Fairfield Gardens
Mt Gravatt Plaza
Faith Lutheran College Redlands
Future Civil Group
IGA
NNB Group

Common questions

Call us directly on 1300 527 669, breakdowns are treated as a priority rather than a standard booking.

We work back from the symptoms through the circuit, isolating sections methodically until the fault is confirmed.

Yes. We explain what went wrong in plain terms before we carry out the repair, not after.

We aim to fix the actual cause rather than only restoring power temporarily, so the same fault doesn't reappear.

Urgent commercial and industrial breakdowns take priority over our scheduled work. Tell us what has happened on site and we will get a technician to you as quickly as we can.

Compliance guides & insights

What is test and tagging?
Testing
19 Nov 2026

What is test and tagging?

Test and tagging is the routine inspection and electrical testing of plug-in equipment, followed by a tag on the lead that records the result.

Switchboard Compliance & Upgrade Guide
Compliance
12 Jul 2026

Switchboard Compliance & Upgrade Guide

Boards are rarely replaced because they fail. They are replaced because the building changed around them and the board never caught up.

Ready when you are.

Tell us what's going on and we'll get back to you with the right next step, whether that's a quote, a site visit or a discussion about your requirements.

1300 JCS NOW1300 527 669