Commercial Lighting & LED Upgrades across south-east Queensland.

Commercial lighting and LED upgrades that improve coverage and lower running costs.

Fully licensed & compliant
Commercial & industrial focus
Rapid breakdown response
50+ years combined experience

What commercial lighting & led upgrades covers

Commercial lighting and LED upgrades cover replacing outdated fittings with LED alternatives, improving coverage, energy use and running costs.

JCS Electrical is a licensed commercial electrician based on the Gold Coast, with 10+ years delivering lighting upgrades across south-east Queensland.

Licensed in Queensland and New South Wales, and Cm3 certified for controlled commercial sites.

How we deliver it

We assess your existing lighting and layout before recommending an upgrade, so the result suits how the space is actually used.

Installation is scheduled to minimise disruption, with old fittings removed and the site left clean.

Commercial Lighting & LED Upgrades

What is included

The exact scope of a lighting upgrade depends on your site and existing fittings, get in touch and we'll confirm what's covered.

Lighting Audits

Assessment of existing lighting, operating conditions and energy use to identify failed, inefficient or unsuitable fittings.

LED Lighting Upgrades

Replacement of outdated fluorescent, halogen and high-intensity lighting with efficient commercial LED alternatives.

Lighting Design and Layouts

Lighting designs and fitting selections developed to suit the building, workspace and required illumination levels.

Lighting Controls and Sensors

Installation of occupancy sensors, daylight controls, timers, dimmers and automated lighting control systems.

Office and Retail Lighting

General, task, display and feature lighting for offices, retail tenancies and other customer-facing environments.

Warehouse and Industrial Lighting

High-bay, low-bay and task lighting designed for warehouses, workshops and industrial facilities.

External and Carpark Lighting

Installation and upgrading of building exteriors, pathways, loading areas, carparks and security lighting.

Testing and Responsible Disposal

Final testing of the completed installation and responsible disposal or recycling of removed lamps and fittings.

The standards this work is measured against

Compliance isn't optional on a commercial or industrial site, our work is measured against the same standards inspectors and insurers check against.

AS/NZS 3760

In-service safety inspection and testing of electrical equipment

AS/NZS 3012

Electrical installations, construction and demolition sites

AS 2293

Emergency escape lighting and exit signs

AS/NZS 3000

Electrical installations, the wiring rules

Why it matters on a commercial site

Lighting affects safety, productivity and running costs all at once, and older fittings are often the least efficient thing on a commercial power bill.

An LED upgrade lowers running costs and can improve coverage in areas that were previously under-lit.

Running cost is only half of it. Older fittings fail one at a time, and every failure is a call-out, a ladder or a lift, and an area out of use while it happens. Replacing them as a group turns a recurring nuisance into a single planned job.

Lighting levels are a workplace question as much as an aesthetic one. A warehouse aisle, a retail display and an office desk are all lit to different requirements, and an upgrade is the natural point to correct a space that has been under-lit for years.

Where we do commercial lighting & led upgrades

The same licensed team covers every area we work in across south-east Queensland, so the standard does not change with the postcode. Choose an area to see how we work there.

Consistent standards across every job.

Commercial &
Industrial Experts

From shopping centres to industrial sites, we understand the pressures of a live commercial environment.

Licensed &
compliant

Fully licensed in Queensland and New South Wales, and Cm3 certified for controlled commercial sites.

Service to
major projects

From routine maintenance to large scale fitouts and new builds, we scale to the size of the job.

One point
of contact

One team stays across your site, so you are not explaining the job again to someone new.

Trusted on site, trusted in the office

1 / 5

Trusted across south-east Queensland

Trusted by property managers, retailers, builders and body corporates across the region.

Retail First
CBRE
Australia Fair
Savills
Logan Hyperdome
First Asset Management
homeWORLD Helensvale
Ray White Commercial
Fairfield Gardens
Mt Gravatt Plaza
Faith Lutheran College Redlands
Future Civil Group
IGA
NNB Group

Common questions

We assess your existing lighting and layout, then recommend LED fittings suited to how the space is used.

In most commercial settings yes, older fittings are typically the least efficient part of a lighting system.

Yes. Old fittings are removed and disposed of, and the site is left clean once the upgrade is done.

Installation is scheduled to minimise disruption, we'll confirm what's practical for your site.

Yes. We upgrade lighting across indoor work areas, car parks and other outdoor commercial spaces.

Compliance guides & insights

What is test and tagging?
Testing
19 Nov 2026

What is test and tagging?

Test and tagging is the routine inspection and electrical testing of plug-in equipment, followed by a tag on the lead that records the result.

Switchboard Compliance & Upgrade Guide
Compliance
12 Jul 2026

Switchboard Compliance & Upgrade Guide

Boards are rarely replaced because they fail. They are replaced because the building changed around them and the board never caught up.

Ready when you are.

Tell us what's going on and we'll get back to you with the right next step, whether that's a quote, a site visit or a discussion about your requirements.

1300 JCS NOW1300 527 669