Commercial Fitouts & Shop Fitting across south-east Queensland.

Commercial electrical fitouts for retail, hospitality and office spaces, completed to a fixed program.

Fully licensed & compliant
Commercial & industrial focus
Rapid breakdown response
50+ years combined experience

What commercial fitouts & shop fitting covers

Commercial fitouts and shop fitting covers the electrical work behind a new or refreshed retail, hospitality or office space, from power and data through to lighting.

JCS Electrical is a licensed commercial electrician based on the Gold Coast, with 10+ years delivering fitout electrical work across south-east Queensland.

Licensed in Queensland and New South Wales, and Cm3 certified for controlled commercial sites.

How we deliver it

We work to the fitout program, coordinating with builders and other trades so electrical work doesn't hold up the handover date.

From first fix through to final connection, the same licensed team stays on the job.

Commercial Fitouts & Shop Fitting

What is included

The exact scope of a fitout depends on the space and the other trades involved, get in touch and we'll confirm what's covered.

Electrical Design and Planning

Review of drawings, site requirements and equipment schedules to plan the electrical installation before work begins.

Lighting and Controls

Installation of general lighting, feature lighting, emergency lighting, sensors, switches and lighting control systems.

Power Installation

Installation of power outlets, dedicated circuits, isolators and supplies for equipment, appliances and mechanical services.

Switchboards and Distribution

New or modified distribution boards, circuit protection and submains sized to suit the completed tenancy.

Data and Communications

Structured data cabling, communications outlets, racks and associated infrastructure for the new fitout.

Tenancy Metering

Installation or modification of tenancy metering, CT metering and main electrical supplies where required.

Defits and Make-Goods

Safe disconnection and removal of redundant electrical services, followed by electrical make-good works.

Testing and Handover

Final testing, certification, circuit schedules, equipment labelling and handover documentation upon completion.

The standards this work is measured against

Compliance isn't optional on a commercial or industrial site, our work is measured against the same standards inspectors and insurers check against.

AS/NZS 3760

In-service safety inspection and testing of electrical equipment

AS/NZS 3012

Electrical installations, construction and demolition sites

AS 2293

Emergency escape lighting and exit signs

AS/NZS 3000

Electrical installations, the wiring rules

Why it matters on a commercial site

A fitout runs to a fixed opening date, and electrical work sits on the critical path for almost everything else that follows it.

Getting it right the first time avoids the rework and delays that push a launch date back.

A retail or hospitality fitout usually sits inside someone else's building, so the work has to satisfy centre management or a landlord as well as the tenant. Knowing what those approvals need before the program starts avoids a hold at the point it hurts most, right before opening.

The electrical work is handed over as documentation as well as a working space. Circuit schedules, test results and as-installed details are what the next contractor works from, and what makes a defects period straightforward rather than a series of return visits.

Where we do commercial fitouts & shop fitting

The same licensed team covers every area we work in across south-east Queensland, so the standard does not change with the postcode. Choose an area to see how we work there.

Consistent standards across every job.

Commercial &
Industrial Experts

From shopping centres to industrial sites, we understand the pressures of a live commercial environment.

Licensed &
compliant

Fully licensed in Queensland and New South Wales, and Cm3 certified for controlled commercial sites.

Service to
major projects

From routine maintenance to large scale fitouts and new builds, we scale to the size of the job.

One point
of contact

One team stays across your site, so you are not explaining the job again to someone new.

Trusted on site, trusted in the office

1 / 5

Trusted across south-east Queensland

Trusted by property managers, retailers, builders and body corporates across the region.

Retail First
CBRE
Australia Fair
Savills
Logan Hyperdome
First Asset Management
homeWORLD Helensvale
Ray White Commercial
Fairfield Gardens
Mt Gravatt Plaza
Faith Lutheran College Redlands
Future Civil Group
IGA
NNB Group

Common questions

Yes. We coordinate with your builder and other trades so electrical work doesn't hold up the handover date.

Yes. Power, lighting and data cabling can all be handled by the same licensed team.

Retail, hospitality and office fitouts across south-east Queensland, from a single tenancy to a larger space.

In most cases yes, first fix work can often begin as soon as the site is accessible.

We work directly with your builder, project manager and any other trades on site to keep the program on track.

Compliance guides & insights

What is test and tagging?
Testing
19 Nov 2026

What is test and tagging?

Test and tagging is the routine inspection and electrical testing of plug-in equipment, followed by a tag on the lead that records the result.

Switchboard Compliance & Upgrade Guide
Compliance
12 Jul 2026

Switchboard Compliance & Upgrade Guide

Boards are rarely replaced because they fail. They are replaced because the building changed around them and the board never caught up.

Ready when you are.

Tell us what's going on and we'll get back to you with the right next step, whether that's a quote, a site visit or a discussion about your requirements.

1300 JCS NOW1300 527 669